Rapid Bike EVO Auto Tuning Fuel Management Tuning Module

FACTORY DIRECT - Typically Ships In 3-5 Days
Score: 5.00 (votes: 1)
Reviews: 1
  ( 1 )
  • $525.00
  • Sold Per Kit
  • Brand Rapid Bike
Qty:  
  • PART NUMBER
    KRBEVO-056A

The Rapid Bike EVO ECU Piggyback Tuning Module includes the Rapid Bike EVO module, USB cable and model specific wiring harness.

The Rapid Bike EVO kit is the perfect tuning solution when you add an exhaust and/or air filter to your motorcycle. This allows you to easily get the best performance and reliability out of your bike.

BASIC INFO:

Rapid Bike EVO is a completely automatic tuning solution. The piggyback unit installs with all plug-n-play stock connectors. Once the unit is installed, the Auto-Adaptive feature monitors your air/fuel parameters and applies the necessary adjustments AS YOU RIDE. No need to connect to your computer, mess with software, or make any changes. JUST RIDE. The Rapid Bike unit handles all the tuning. Perfect for stock bikes, slipon exhausts, full systems, and other common motorcycle upgrades.

Because this unit simply piggybacks the ECU, the unit can be removed at any time, and does not make any permanent changes that may affect the factory warranty.

TECHNICAL INFO:

RAPID BIKE EVO module manages up to 8 injectors and modulates the signal up to two O2 sensors (up to 2 lambdas). The purpose of the O2 sensor (lambda) modulation is to prevent the stock ECU from recognizing the adjustment applied by the RapidBike module to the injection map without any further attempts to re-set the stock parameters matching the criteria fixed by the restrictive exhaust gas emission laws. 

The Rapid Bike Evo module’s most important benefit is the Auto-adaptive feature. This offers the ability to automatically correct the injection map by reading the signal of the stock O2 sensor (lambda) and making the adjustments automatically while riding the bike.

When riding the motorcycle, the self-adaptive feature determines the automatic self-correction of the air/fuel ratio maps: this active management is added up to the pre-set parameters. The adjustments set by RapidBike EVO improve the engine efficiency in order to reach the best performance.The self-correction process is set in multipoint technology according to RPM and TPS, for the whole range of the engine working, even when the original RPM limiter is raised (when available).
 
Modulating the stock O2 sensor (lambda) signal is a technology far more advanced than the so called “O2 sensor eliminator” (or any other similar device used by the competitors) since they send a static/constant signal which is in conflict with the typical behavior of the lambda sensors, therefore causing the main ECU to perceive such a constant signal as a mistake to be corrected.
  
The Rapid Bike Evo module is can be moved to your next bike and simply sent back to Rapid Bike for a map reflash (assuming the a tune is offered for that bike). All you would need is the proper wiring harness (available from Rapid Bike). This essentially means this could be the last tuning module you ever buy!

On most models, the Rapid Bike Evo unit can remove the speed limiter and to increase the rpm limiter up to 1000 rpm over stock rev range and also has an accelerator pump feature.

QUICK SHIFT READY: Rapid Bike Race and Rapid Bike Evo systems are quick shift ready. All you need is the additional Rapid Bike quick shift sensor.

Note: All Rapid Bike products are designed for closed-course competition use.

Note: The optional "My Tuning" Bike Module is highly recommended if you want to add the "Map per Gear" function. The "My Tuning" module is not required for the Rapid Bike system to run it's internal auto adaptive tuning feature, but it will increase the speed and accuracy of the adaptive tuning to be a real time tuning solution. Suggested for track use that may have varying parameters (race fuel vs pump gas, morning practice sessions vs warmer afternoon sessions, etc)

  • Make/Model/Year
    Ducati / Diavel / 2016, Ducati / Diavel / 2017, Ducati / Diavel / 2018
  • Sold
    Per Kit
  • Product
    ECU & Fuel Tuning
  • Brand
    Rapid Bike

Product questions

  • Jay Lopez
    Aug 29, 2019, 03:12

    Good morning.
    I just purchased a full Termignoni exhaust and am having a tough time finding a map that works with my exhaust. A few questions 1) Will the Rapid Bike ECU eliminate the need for me to get a dyno tune? 2) Is the Rapid Bike ECU fully compatible with my Termignoni full exhaust? 3) How difficult is the installation?
    Any info in addition to the above answers is really appreciated. Thank you for your time.

    Administrator
    Aug 30, 2019, 10:15

    As long as the Rapid Bike unit is the specific unit for your bike, it will work with ANY exhaust. There is no need to go dyno tune the bike, because the rapid bike take data measurements while you ride, and applies the recommended setting automatically. Install it and ride! Installation varies by model, but as long as you are comfortable getting down to the injectors on your bike, the cable kit is plug and play. We always recommend that these parts are installed by trained professionals, however, most of our customers handle the install themselves.

Customer reviews
Average rating:
5.00 (Votes: 1)
Rating of votes (1)
5
 
1customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
Please sign in to add review
  • All i can say is wow. I didnt know my diavel could run this smoothly! haha

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought