Rapid Bike EASY add-on electronic module is equipped with a microprocessor managing directly the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate the torque and power gaps typical of the low andmedium rpm.
Install your EASY module inline to the stock lambda O2 sensor connector and check for operating status thanks to a led. Now you are ready for the module fine-tuning: this is a very simple procedure (using two easily accessible trimmers) without any need for additional software operations. Its literally that EASY!
This is a great solution for when adding an aftermarket exhaust or intake to your bike. The simple adjustments are done manually with the 2 dials. No attaching to a computer or expensive dyno tuning required.
EASY add-on module can manage up to two lambda sensors, and it is designed especially for motorbikes with a standard configuration.
Compared to the stock version (in blue color for the image showing the Air Fuel Ratio), RapidBike EASY (in red color) gains a higher speed keeping the same throttle opening, while placing the lambda sensor value in the ideal range between 13,5 – 14,5 AFR
Note: This unit manages the closed loop area only.