Oval High Mount Exhaust by SC-Project
- Sold Per Kit
- Brand SC-Project
SC-Project is a race tested and race proven Italian exhaust manufacturer. SC-Project uses their MotoGP, Moto3, Moto2 and Superbike racing experience to push the limits and develop the highest level of exhaust performance.
SC-Project exhausts are hand made right along side the same exhausts you see on MotoGP bikes and at race tracks around the world. SC-Project is committed to putting race quality performance, sound and weight reduction in the hands of all motorcycle enthusiasts.
- Slip-on silencer. In the slip-on line the specific link pipe is included in the kit.
- To have the maximum performance of the exhaust is recommended to install an added power unit.
- Everything to install the exhaust on the bike is included: 1 silencer, 1 link pipe, 1 stainless steel clamp with the rubber, springs and screws, high temperature stickers, CEE homologation card specific for the motorbike model.
- 24 months SC-Project official guarantee
- Street legal version according "EU" regulations.
- DB Killer removable to modify from street legal configuration to racing configuration
Make/Model/YearDucati / Hypermotard 821 / 2013, Ducati / Hypermotard 939 / 2018, Ducati / Hyperstrada 939 / 2017, Ducati / Hypermotard 939 SP / 2017, Ducati / Hypermotard 939 / 2017, Ducati / Hyperstrada 939 / 2016, Ducati / Hypermotard 939 SP / 2016, Ducati / Hypermotard 939 / 2016, Ducati / Hyperstrada 821 / 2015, Ducati / Hyperstrada 821 / 2014, Ducati / Hyperstrada 821 / 2013, Ducati / Hypermotard 821 SP / 2015, Ducati / Hypermotard 821 SP / 2014, Ducati / Hypermotard 821 SP / 2013, Ducati / Hypermotard 821 / 2015, Ducati / Hypermotard 821 / 2014, Ducati / Hypermotard 939 SP / 2018
ProductExhausts & Air Filters
Select Exhaust FinishTitanium with carbon cap, Carbon fiber with carbon cap
Apr 9, 2019, 17:12
Can you just fit this can and pipe or does it require any removal of any other parts apart from the original exhaust, plus does the bike require any remapping? (Ducati hypermotard 939 sp 2017)Apr 16, 2019, 15:14
This will fit to the Hypermotard 821/939 SP's no problem! Just not the Strada with the bag.
Apr 5, 2019, 20:04
For the 2018 Hypermotard model, does this kit come with the mounting bracket for the high rise pipe end? As I do not see one in that area/under the rear fairing. Much thanks!Apr 9, 2019, 14:24
This kit comes with everything need for installation for your 939 Model. There is a metal bracket that you have to take the rear side fairing off to install. From there the exhaust clamp mounts to that bracket.
Apr 11, 2016, 14:03
INTERESTED IN THE OVAL HIGH MOUNT EXHAUST BY SC PROJECT, BUT CONCERNED ABOUT THE INTERFERENCE OF THE REAR CAN WITH A PASSENGER LEG. IS THIS IN THE WAY OR IS IT TUCKED AWAY ENOUGH UNDER REAR FENDER. CAN'T REALLY TELL FROM PICTURES AVAILABLE. THANKS.Apr 16, 2016, 11:08
We have not had any complaints about the rear passenger leg with this kit. However, we can not assume that our customers have been riding with a passenger. We do not use the passenger pegs on our Hyper 821SP, so we cannot comment personally. With the design, the passenger would need to be mindful of the exhaust position.