19x18 Radial Brake Master Cylinder with Painted Body by Accossato Racing Universal

Accossato has been producing Italian made parts since 1969. Accossato braking components can be found in every racing paddock around the world. From Motoamerica to MotoGP, Accossato produces some of the best braking components in the world.

Accossato 19x18 Radial Brake Master Cylinder is made in aluminum and painted to give you the custom look for your motorcycle. The lever color is black, regardless of painted body color. The Piston diameter is 19mm: suitable for dual-disc front braking system. The pivot distance is 18 mm. This is a great setup for track use, and high level street use.  This brake master cylinder is fully Made in Italy; the screws are made of stainless steel, The bleeding valve is in zinc coated steel and the seals are made with a compound developed in Formula 1. Every component is designed to guarantee the shortest passive stroke, while increasing the functionality and feel of your front brake.

Bolt pitch for fitting your brake line banjo bolt is M10x1.

The 19x18 front brake master cylinder is suggested for front dual-disc systems. 19 represents the 19mm piston diameter, 18 represents the piston to fulcrum distance (18mm).

Note: A longer fulcrum distance (higher number) will increase the braking power, while reducing the brake lever modulation. A shorter fulcrum distance (lower number) offers better brake lever modulation, but has slightly reduced overall braking power.

Note: The Revolution folding lever allows for you to adjust for a short or long length lever using the included inserts.

Note: The brake light actuator switch is not included - you can purchase it separately using part number ID001 or ID002 for street use. Track use does not require the brake light switch. The brake fluid reservoir tank is not included with the master cylinder, you can purchase it separately, because several different options for fluid tanks are available.

Note: Designed to mount to standard 22mm handlebars or clipons.