Ride By Wire URLO Billet Aluminum Grips by Rizoma

This item is out of stock
Score: 5.00 (votes: 1)
Reviews: 1
  ( 1 )
  • $63.00
  • Sold Per Pair
  • Brand Rizoma
  • PART NUMBER
    GRDW221Z10A-OPEN

These Rizoma URLO grips will fit standard 22mm (7/8") handle bars and clip-ons.

Simply the most beautifully designed and elegant grips out there and the finish is truly impeccable. Includes a built in throttle tube for the throttle side. The clutch side installs directly onto the handlebar or clipon using the included set screws. Motovation recommends blue loctite on all set screws.

Note: These grips are designed specifically with the ride by wire technology in mind.

  • Machined from billet aluminum
  • Grip and comfort
  • Style and efficient
  • Two colors available
  • Make/Model/Year
    Ducati / Monster 1200 / 2014, Ducati / Hypermotard 939 / 2017, Ducati / Hypermotard 939 SP / 2016, Ducati / Hypermotard 939 SP / 2017, Ducati / Multistrada 1200 / 2015, Ducati / Multistrada 1200 / 2016, Ducati / Multistrada 1200 Enduro / 2016, Ducati / Multistrada 1200 Enduro / 2017, Ducati / Multistrada 1200 S / 2015, Ducati / Multistrada 1200 S / 2016, Ducati / Multistrada 1200 / 2017, Ducati / Multistrada 1200 S / 2017, Ducati / Hypermotard 939 / 2018, Ducati / Hypermotard 939 SP / 2018, Ducati / Hypermotard 939 / 2016, Ducati / Hypermotard 821 SP / 2016, Ducati / Hypermotard 821 SP / 2015, Ducati / Monster 1200 / 2015, Ducati / Monster 1200 / 2016, Ducati / Monster 1200S / 2014, Ducati / Monster 1200S / 2015, Ducati / Monster 1200S / 2016, Ducati / Monster 821 / 2014, Ducati / Monster 821 / 2015, Ducati / Monster 821 / 2016, Ducati / Hypermotard 821 / 2013, Ducati / Hypermotard 821 / 2014, Ducati / Hypermotard 821 / 2015, Ducati / Hypermotard 821 SP / 2013, Ducati / Hypermotard 821 SP / 2014, Ducati / Multistrada 1200 Enduro / 2018
  • Sold
    Per Pair
  • Product
    Grips & Levers
  • Brand
    Rizoma
  • Select Color
    Black, Silver, OPEN BOX Discounted - BLACK, OPEN BOX Discounted - SILVER

Product questions

No questions yet. Be the first to ask the question!
Customer reviews
Average rating:
5.00 (Votes: 1)
Rating of votes (1)
5
 
1customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
Please sign in to add review
  • Theses grips work and look great! The install on my Monster 821 was pretty simple, but I'll give you an important tip for the installation of the throttle side that will save you hours of frustration. Loosen the bolts on the throttle housing (T25 security bolts) and remove the covers. You'll see that there's a tension spring inside that releases (ride by wire). Loosen your bars and slide them over as far as possible to give you the slack needed on the throttle wire. Remove the throttle, housing, and spring from the bars. You'll see that the spring lines up with a small hole in the plastic cam and on the inside of the cover. Take your new grip and put everything together inside the front cover. Place the rear cover on, then take a screwdriver and push the spring to the top until it falls into place on the back cover. You can now put the screws back in the housing a few turns, install it back on the bars, line up the guide hole on the bars, then snug down the bolts. Your throttle should spring back to place and you're good to go!

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought