Frame Sliders by Motovation Accessories
$98.99, save $79.19
- Sold Per Kit
- Brand Motovation Accessories
Motovation frame sliders help to protect your motorcycle frame, engine and cases during a crash, slide or drop.
Comes with everything needed to install. A relatively easy install with minimal tools. Motovation frame sliders are the best way to protect your bike, and are the same quality that riders and racers have come to expect. Motovation has over a decade of research and development behind our products. Motovation slider pucks are made of a unique proprietary material and are designed for the best possible protection. Designed for street or track use.
No fairing modification is required.
Motovation Part # FSM05
Note: Images for reference only and may vary slightly for your bike model
Make/Model/YearMV Agusta / Brutale 1090 / 2012, MV Agusta / Brutale 1090 RR / 2014, MV Agusta / Brutale 1090 RR / 2015, MV Agusta / Brutale 1090 RR / 2016, MV Agusta / Brutale 1090 / 2009, MV Agusta / Brutale 990 / 2009, MV Agusta / Brutale 990 / 2010, MV Agusta / Brutale 1090 RR / 2017, MV Agusta / Brutale 1090 RR / 2018, MV Agusta / Brutale 1090 / 2017, MV Agusta / Brutale 1090 RR / 2013, MV Agusta / Brutale 1090 RR / 2012, MV Agusta / Brutale 1090 / 2010, MV Agusta / Brutale 1090 / 2011, MV Agusta / Brutale 1090 / 2013, MV Agusta / Brutale 1090 / 2014, MV Agusta / Brutale 1090 / 2015, MV Agusta / Brutale 1090 / 2016, MV Agusta / Brutale 1090 RR / 2009, MV Agusta / Brutale 1090 RR / 2010, MV Agusta / Brutale 1090 RR / 2011, MV Agusta / Brutale 1090 / 2018
ProductEngine & Frame Sliders
All Years MV Agusta Brutale 990/1090, F4-1000 Race Frame Sliders Install Instructions
Congratulations! You have just purchased the world’s finest frame sliders for the new MV Agusta Brutale 990/1090. These sliders have been designed to offer unsurpassed protection to your MV Agusta Brutale 990/1090 in the unfortunate event of a lowside or tip over. Motovation frame sliders are designed and manufactured by a company that only makes frame sliders. Each and every model is tested for drop and slide protection. They are tough but not brittle and can also absorb a huge impact. Sportsriders around the world who have tested various models of our products on the track have all given their thumbs up after experiencing first hand, the benefits of Motovation Frame Sliders.
Please read all instructions before beginning work! These frame sliders are designed to fit specific engine mounts of your MV Agusta Brutale 990/1090 and F4. It is highly recommended that you refer to your service manual before performing this installation.
Included in this kit:
(2) Heat treated socket head bolts • m12 1.25 pitch bolts
(2) Anodized Aluminum bushings (pressed into plastic)
(2) Nylon Frame Sliders
Before beginning make sure bike is level and engine supported from below by blocks to prevent possible engine movement. Attempt this install one side at a time only!
1. Remove the right-side engine mount bolt (forward upper mount).
2. Install bolt into slider and into aluminum bush into the engine.
3. Tighten the engine mount bolt to the factory specifications (approximately 41 ft/lbs)- DO NOT OVERTIGHTEN.
4. Repeat with the other side.
Use of some non permanent Loctite on bolt threads is recommended.
MV Agusta BrutaleMV Agusta Brutale
6. Tighten the engine mount bolt to the factory specifications - DO NOT OVERTIGHTEN.
For F4-1000 2010+
These sliders will install in a similar way but are designed only for under fairing use and fairing modification is required.
Thank-you for purchasing Motovation products. Please ride safe and always wear protective clothing.
WARRANTY AND LIABILITY LIMITATIONS
Except as may be expressly set forth in the product invoice, MotovationUSA makes no representations or warranties as to any of the products distributed by us, expressed or implied, including without limitation any warranties of merchantability or fitness for a particular purpose. Motorcycles can be dangerous. MotovationUSA has no control over the usage of any part and expects their customers to exercise good judgment as to the proper selection, installation, use and maintenance of any part. MotovationUSA assumes no responsibility for damage or injury of any kind because of the misuse or improper application of any part in any way by any person. MotovationUSA shall not be liable for any indirect or consequential damages whatsoever. All matters shall be interpreted under Texas law. All merchandise distributed by MotovationUSA is guaranteed against defects in material and workmanship only. Final decision will be made in a just and prompt manner. Replacement will be limited to parts only and does not include labor claims of any type. If the manufacturer has a written warranty, it will be included with the item you purchased. The manufacturer shall be solely responsible for any damage to person or property arising from design and manufacture and testing of its products and we accept no liability for such damages. We shall not be liable for consequential damages. Torque settings are meant to serve as guides only. Please consult you owners manual for manufacturer's recommended settings.