Dynojet Auto Tune Kit for Power Commander V
$324.95, save $32.49
- Make/Model/Year Universal
- Brand Dynojet
The Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically logs these suggestions while you ride.
This Dynojet Auto Tuner constantly monitors your bike’s air/fuel mixture from your exhaust gases and sends this data to your PCV unit. The Dyno Jet Autotune module automatically makes changes to the air and fuel ratio based your current map. Each map that Dynojet offers has preset air and fuel ratio values included that they have found to be the best overall setting for your bike. This means no matter what aftermarket exhaust or air filter you install on your motorcycle, the Auto Tuner will ensure that your bike has the best air / fuel ratio.
Each throttle position and RPM combination can also be individually adjustable. This allows both fuel economy during lower RPM cruising, while also maintaining peak output at larger throttle openings. For most models of bikes it is also possible to adjust the air and fuel ratios of each gear. This gives you total control of the fueling in every gear and throttle/RPM combination if desired.
Single Channel AT-200 - The Single Channel AT-200 is a universal fit, single O2 sensor kit. It can be used on any motorcycle that has a PCV installed on it. It includes a single O2 sensor, cut-to-length sensor cable, control module, O2 sensor, one weld boss kit and a CAN connection cable. It requires a ground and 12 volt connection be made using the supplied Posi-Taps.
Dual Channel AT-300 - The Dual Channel AT-300 is designed for twin cylinder motorcycles and ATVs that use the Power Commander V allowing control of two cylinders simultaneously. The kit includes two O2 sensors, a control module with 2 sensor inputs, two cut-to-length sensor cables, and two weld-on bosses. It also requires a ground and 12 volt connection to be made using the supplied wiring hardware.
- Plugs directly into the Power Commander V
- Patented Tuning Link dynamometer technology
- 18mm Bosch Wideband O2 sensor
- Automatically makes air/fuel corrections
- Made in the USA
Note: To use these kits your exhaust must have an 18mm bung installed. If your current exhaust does not have this size bung you must weld one on. These kits come with the weld-on bung to fit the 18mm sensor.
ProductECU & Fuel Tuning
Select VersionSingle Channel AT-200, Dual Channel AT-300