Rear end collisions are the most common type of road accident. Motorcycle Safety Foundation (MSF) and training literature suggest that you pump your brakes (flash your brake lights) for improved visibility at the start of deceleration. The use of this device will increase safety, especially on motorcycles.
‘Wakes up’ drivers behind you – no more tailgating! Easy to fit and operate, you can choose from 12 flash patterns and won’t waste any space on your bike – it’s just so tiny. Get protected today
The Healtech Electronics Brake Light Pro flasher module will fit all vehicles and will power all types of 12V bulbs (incandescent, halogen) and LED lights.
It is simple to install and connects in-line with the brake light wire. The BLP module is the next generation of brake light flashers with features not found in competing products – touch sensor for easy programming and maximum reliability, high power FET with short circuit protection, and extremely small size for trouble free fitment in tight spaces.
Voltage Range: 6v to 20v
Maximum Load: 120W
Operating Temp: -40F to +176F
Light Patterns: 11 modes + bypass + demo mode
BLP Flashing Modes Notes: - In bypass mode, the brake light works the same way as without the module installed. It can be activated with 3 taps. - Modes 1 to 10 start with a 1 second pulse, which ensures the brake light reaches the maximum brightness within the shortest time. Then it flashes the light with 75% duty cycle (75% ON, 25% OFF) for best visibility (flashing light without loss of brightness). - In modes 1 to 11, when the flashing cycle ends, the brake light remains ON as long as you apply the brake. - Modes 7 to 10 are suited for LED lights only as bulbs can not follow the flashing speed of these modes. - The setting is stored in flash memory, no need to re-program the device if you disconnected the battery.