This product is vehicle specific. Click here to select a specific bike to ensure fitment.

Frame Sliders by Motovation Accessories

In stock (12 items available)
Score: 4.63 (votes: 8)
Reviews: 1
1
  • $179.99
Old price: $199.99 , you save $20.00
  • 10% off
  • Sold Per Kit
  • Brand Motovation Accessories
Qty:  
  • SKU
    FSA07S

Motovation frame sliders help to protect your motorcycle frame, engine and cases during a crash, slide or drop.

Comes with everything needed to install. A relatively easy install with minimal tools. Motovation frame sliders are the best way to protect your bike, and are the same quality that riders and racers have come to expect. Motovation has over a decade of research and development behind our products. Motovation slider pucks are made of a unique proprietary material and are designed for the best possible protection. Designed for street or track use.

No fairing modification is required.

Motovation Part # FSA07S

  • Make/Model/Year
    Aprilia / Tuono V4 1100 Factory / 2018, Aprilia / Tuono V4 R / 2013, Aprilia / Tuono V4 R / 2012, Aprilia / Tuono V4 R / 2011, Aprilia / Tuono V4 1100 RR / 2016, Aprilia / Tuono V4 1100 RR / 2015, Aprilia / Tuono V4 1100 Factory / 2016, Aprilia / Tuono V4 1100 Factory / 2015, Aprilia / RSV4 RR / 2016, Aprilia / RSV4 RR / 2015, Aprilia / RSV4 RF / 2016, Aprilia / RSV4 RF / 2015, Aprilia / Tuono V4 R / 2014, Aprilia / Tuono V4 R / 2015, Aprilia / Tuono V4 R APRC / 2011, Aprilia / Tuono V4 1100 RR / 2018, Aprilia / RSV4 RF / 2018, Aprilia / RSV4 RR / 2018, Aprilia / RSV4 RR / 2017, Aprilia / Tuono V4 1100 RR / 2017, Aprilia / Tuono V4 1100 Factory / 2017, Aprilia / RSV4 RF / 2017, Aprilia / Tuono V4 R APRC / 2015, Aprilia / Tuono V4 R APRC / 2014, Aprilia / Tuono V4 R APRC / 2013, Aprilia / Tuono V4 R APRC / 2012, Aprilia / RSV4 R APRC / 2014, Aprilia / RSV4 R APRC / 2013, Aprilia / RSV4 Factory / 2012, Aprilia / RSV4 Factory / 2011, Aprilia / RSV4 Factory / 2010, Aprilia / RSV4 Factory / 2009, Aprilia / RSV4 / 2015, Aprilia / RSV4 / 2014, Aprilia / RSV4 / 2013, Aprilia / RSV4 / 2012, Aprilia / RSV4 / 2011, Aprilia / RSV4 / 2010, Aprilia / RSV4 / 2009, Aprilia / RSV4 Factory / 2013, Aprilia / RSV4 Factory / 2014, Aprilia / RSV4 Factory APRC / 2011, Aprilia / RSV4 R / 2015, Aprilia / RSV4 R / 2014, Aprilia / RSV4 R / 2012, Aprilia / RSV4 R / 2013, Aprilia / RSV4 R / 2011, Aprilia / RSV4 R / 2010, Aprilia / RSV4 R / 2009, Aprilia / RSV4 Factory APRC / 2015, Aprilia / RSV4 Factory APRC / 2013, Aprilia / RSV4 Factory APRC / 2014, Aprilia / RSV4 Factory APRC / 2012, Aprilia / RSV4 / 2008
  • Sold
    Per Kit
  • Product
    Engine & Frame Sliders
  • Brand
    Motovation Accessories

Product questions

No questions yet. Be the first to ask the question!
Customer reviews
Average rating:
4.63 (Votes: 8)
Rating of votes (8)
5
 
 
6customers
4
 
 
1customers
3
 
 
1customers
2
 
 
0customers
1
 
 
0customers
 
Please sign in to add review
  • Roberto Pewis
    Apr 13, 2018, 17:02
    Outstanding fit and protection!

***PLEASE NOTE: Motovation must insist that all protection parts and accessories are professionally installed to ensure proper fitment and maximum protection. These instructions are for reference only, and do not reference a specific bike model. Your installation procedure may vary.***

Motovation Frame Sliders

These sliders have been designed to offer unsurpassed protection to your engine and frame in the unfortunate event of a lowside or tip over. Riders around the world have tested our products on the street and track with outstanding results.

Note: Motovation recommends the use of medium strength (Blue) Loctite on all bolts.

 

 

This Motovation frame slider kit will include: (some models may vary slightly)

(2) Engine Slider Pucks with aluminum inserts, flat washers, lock washers and bolts - to mount to brackets

(2) Frame Mount Brackets (labeled Left and Right)

(4) Stainless Steel socket head bolts - (2) 80mm  (2) 95mm - for bracket to frame mounting

(6) Aluminum Bracket Spacers - (4) 20mm 

 

 

 

 

 

 

Instructions:

1) Make sure the bike is on a stand and vertical, and for safety make sure that the engine is cool and is supported from below by blocks.

RIGHT SIDE (In relation to sitting on the bike)

1) Remove the rear side fairing bolt for access to the frame.

2) Remove the 2 factory bolts shown. NOTE: Be careful not to drop the OEM bushings behind the frame.

 

3) Install the brackets marked RIGHT (R) into the frame holes using 2 of the supplied bushings between the bracket and the frame. You will use the (2) 95mm hardened bolts supplied. The shorter end of the bracket should face towards the rear of the bike, allowing the slider puck (when installed) to stick out just beyond the fairing. 

4) Tighten the 2 bolts holding the bracket into the frame using the same factory torque specs recommended in your service manual for the OEM bolts you are replacing.

5) Install the frame slider puck into the bracket using the included bolt, flat washer, and lock washer. 35 ft/lbs of torque is recommended for the bolt that goes into the Motovation bracket.

6) Reinstall fairing bolt.

DO NOT OVERTIGHTEN.

 

LEFT SIDE (In relation to sitting on the bike)

1) Remove the rear side fairing bolt for access to the frame.

2) Remove the 2 factory bolts shown. NOTE: Be careful not to drop the OEM bushings behind the frame.

 

3) Install the brackets marked LEFT (L) into the frame holes using 2 of the supplied bushings between the bracket and the frame. You will use the (2) 80mm hardened bolts supplied. The shorter end of the bracket should face towards the rear of the bike, allowing the slider puck (when installed) to stick out just beyond the fairing.

4) Tighten the 2 bolts holding the bracket into the frame using the same factory torque specs recommended in your service manual for the OEM bolts you are replacing.

5) Install the frame slider puck into the bracket using the included bolt, flat washer, and lock washer. 35 ft/lbs of torque is recommended for the bolt that goes into the Motovation bracket.

6) Reinstall fairing bolt.

DO NOT OVERTIGHTEN.

Note: We recommend that you check the torque on the slider bolts after several heat cycles to ensure secure tightness.

 

Additional Reference Images:

 

 

 

 

 

Please double check your install and feel free to CONTACT US with any questions. Motovation is not responsible for any damage during installation and recommends professional installation for all parts and accessories.

 

 

Motorcycles can be dangerous. Motovation has no control over the usage of any part and expects their customers to exercise good judgment as to the proper selection, installation, use and maintenance of any part. Motovation assumes no responsibility for damage or injury of any kind because of the misuse or improper installation or application of any part in any way by any person. MotovationUSA shall not be liable for any indirect or consequential damages whatsoever.

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought