These BST carbon wheels are some of best wheels on the market today. The single most noticeable upgrade you can do to your motorcycle. Increased acceleration, handling and braking by significant weight reduction.
BST Wheels have the lowest un-sprung weight and moment of inertia compared to current aftermarket wheels, and are lighter and stronger than traditional aluminum or magnesium wheels. Best of all they have the same unique look that only carbon fiber can offer. All BST wheels are DOT, JWL and TUV compliant and have individual serial numbers.
Blackstone Tek BST wheels are 40-60% lighter than stock wheels and will reduce a bike's Moment of Inertia (ie. less energy is required to start or stop the bike) and reduce the gyroscopic effect of the wheels. Carbon fiber wheels are also stronger than traditional wheels. This means that:
- Faster acceleration
- Faster braking
- Easier cornering and maneuverability
- Ultra-high tolerance to damage
- Low corrosion susceptibility
These are the 5 spoke design and will include steel bearings. Optional ceramic bearings and additional wheel sizes are available. Please contact us directly for special orders. Images are for reference and may vary slightly to fit your exact model.
Brock s Performance recommends Vortex sprockets for all BST applications, but any sprocket that has the following measurements will work: 5 (10mm holes) with a PCD (Pitch Circle Diameter) of 100mm and a sprocket ID of 76mm.
Rear Wheel Part # 162522
Rear 6 x 17, 5 Spoke Slanted
- SIZE : 6" x 17"
- WEIGHT : 9.35 lbs. (4.24 kg) with sprocket carrier and hardware (without sprocket)
Add 1.05 lbs. (0.476 kg) with Worldwide Bearings ceramic bearings
Add 1.15 lbs. (0.521 kg) with Worldwide Bearings steel bearings
- STATIC LOAD RATING : 550 lbs (250 kg)
- MATERIALS : Carbon fiber and aluminum
- STYLE : Slanted, five-spoke configuration
- VALVE STEMS : BST Ultra-High-Speed (UHS) 90-degree, aluminum stems and caps
Note: Brocks blue decal is for demo purposes and will not be included on your BST wheel