5988U6/M Assortment of 214 tools in EVA foam trays by Beta Tools
- Sold Per Kit
- Brand Beta Tools USA
Beta produces tools for professional mechanics and racers around the world. Made in Italy, these are some of the best quality tools on the market. From MotoGP to World Superbike, Beta tools can be found in nearly every racing paddock. Look for the Beta logo in your favorite racing team garage!
Italian quality tools that you can trust. Use the tools the pros use! Motovation works direct with the Beta Tools factory to provide you with the newest information and offerings from Beta. Motovation is your official Beta Tools distributor.
Start your Beta tool collection right! This comprehensive 214 piece kit includes:
| combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm |
| double open end wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm |
| double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm |
| ball head offset hexagon key wrenches 1,5-2-2,5-3-4-5-6-8-10 mm |
| screwdriver for slotted head screws 2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm |
| screwdriver for slotted head screws, extra-short series 4x30 mm |
| screwdriver for cross head Phillips® screws PH0x60-PH1x80-PH2x100-PH3x150 mm |
| screwdriver for cross head Phillips® screws, extra-short series PH1x30 mm |
| screwdrivers for Torx® head screws, with handles T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40-T45 |
| mains testing screwdriver |
| drift punches ; 2-3-4 mm |
| pin punches ; 2-3-4-5-6-8 mm |
| center punch ; 4 mm |
| flat chisels 150 mm |
| flat chisels, ribbed type 200-250 mm |
| cape chisels, standard type 125 mm |
| engineer’s hammer 500 g |
| soft face hammer ; 35 mm |
| measuring tape 3 m |
| telescopic magnet with flexible head |
| second-cut square files 200 mm |
| second-cut triangular files 200 mm |
| second-cut flat files 200 mm |
| second-cut half-round files 200 mm |
| second-cut round files 200 mm |
| Steel wire brush |
| snap - off blade utility knife 18 mm |
| circlip pliers straight, internal 180 mm |
| circlip pliers bent, internal 170 mm |
| circlip pliers straight, external 175 mm |
| circlip pliers bent, external 175 mm |
| Slip joint pliers boxed joints 250 mm |
| self - locking pliers 240 mm |
| Diagonal cutting nippers 160 mm |
| construction worker’s pincers 220 mm |
| tin snips 250 mm |
| electrician's scissors, straight blades |
| half-round needle nose pliers 180 mm |
| Extra-long needle nose pliers 160 mm |
| Extra-long bent needle nose pliers 160 mm |
| socket bit holder |
| socket bit holder |
| socket bit holder |
| 1/4" hexagon sockets 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm |
| hexagon hand sockets, long series 5-6-7-8-9-10-11-12-13 mm |
| 1/4" socket drivers for hexagon screws 3-4-5-6-7 mm |
| socket drivers for slotted head screws 0,8x4-1x5,5-1,2x6,5-1,2x8 mm |
| socket drivers for cross head Phillips® screws PH1-PH2-PH3-PH4 |
| socket drivers for Torx® head screws T10-T15-T20-T25-T27-T30-T40 |
| 1/4” drive extension bar 50 mm |
| 1/4” drive extension bar 100 mm |
| 1/4” drive extension bar 150 mm |
| 1/4" drive universal joint |
| 1/4" drive spinner handle |
| 1/4" drive swivel T-handle |
| 1/4" reversible ratchet |
| 1/2" square drive hexagon sockets 8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm |
| adapter, 1/2” female and 3/8” male drives 125 mm |
| 1/2" drive universal joint 250 mm |
| 1/2” wobble extension bar |
| 1/2” wobble extension bar |
| 1/2" drive sliding T-handle |
| 1/2" drive reversible ratchet |
| 1/2" sockets for Torx® head screws 10-12-14-16-18-20-22-24 mm |
| hexagon hand sockets 10-12-13-14-15-16-17-18-19-21-22 mm |
Note: 588mm x 367mm Foam trays included.
The original purchaser of Beta hand tools is entitled to a limited lifetime warranty. The warranty is only extended after Beta Tools USA examination and found to be a result of defective material or faulty workmanship. The warranty does not cover products damaged from misuse, modifications, neglect or normal wear and tear as determined by Beta Tools USA. Consumable products are excluded from the warranty and do not apply to normal wear parts such as, but not limited to, cutting blades, caster wheels, roller bearings, worn bits, drivers, drill bits, taps, files, ratchet gears, pneumatic gears and torque products. A Return Goods Authorization (RGA) number is required prior to returning any product to Beta Tools USA.
Beta Tools handles all warranty claims factory direct. Motovation is an authorized dealer and reseller, but we are not able to process warranty claims internally.
