19x20 Radial Brake Master Cylinder with Integrated Fluid Reservoir by Accossato Racing Universal

Accossato has been producing Italian made parts since 1969. Accossato braking components can be found in every racing paddock around the world. From Motoamerica to MotoGP, Accossato produces some of the best braking components in the world.

Accossato 19x20 Radial Brake Master Cylinder is made in aluminum. The Piston diameter is 19mm: suitable for dual-disc front braking system. The pivot distance is 20mm. This is commonly used setup for off road racing applications.  This brake master cylinder is fully Made in Italy; the screws are made of stainless steel, The bleeding valve is in zinc coated steel and the seals are made with a compound developed in Formula 1. Every component is designed to guarantee the shortest passive stroke, while increasing the functionality and feel of your front brake. On the reservoir there is a sight window to check the fluid level inside of it

Bolt pitch for fitting your brake line banjo bolt is M10x1.

The 19x20 front brake master cylinder is suggested for front dual-disc systems. 19 represents the 19mm piston diameter, 20 represents the fulcrum to piston distance (20mm).

Note: A longer fulcrum distance (higher number) will increase the braking power, while reducing the brake lever modulation. A shorter fulcrum distance (lower number) offers better brake lever modulation, but has slightly reduced overall braking power.

Note: The brake light actuator switch is not included - you can purchase it separately using part number ID001 or ID002 for street use. Track/Off-Road use does not require the brake light switch.

Note: Designed to mount to standard 22mm handlebars.

Note: Includes folding lever to reduce the chance of lever breakage.