2004-5 Yamaha YZF1000 R1 Race (no cut) Frame Sliders Install Instructions

Congratulations! You have just purchased the world’s finest frame sliders for the 2004 Yamaha R1. These sliders have been designed to offer unsurpassed protection to your Yamaha YZF1000 R1 in the unfortunate event of a lowside or tip over. Motovation frame sliders are designed and manufactured by a company that only makes frame sliders. Each and every model is tested for drop and slide protection. They are tough but not brittle and can also absorb a huge impact. Sportsriders around the world who have tested various models of our products on the track have all given their thumbs up after experiencing first hand, the benefits of Motovation Frame Sliders.

Please read all instructions before beginning work! These frame sliders are designed to fit specific engine mounts of your Yamaha R1. This kit has separate left and right pieces (left and right while sitting on the bike). It is highly recommended that you refer to your service manual before performing this installation.

Tools Required:
Torque Wrench
8 mm Allen key for torque wrench
12mm Allen key

Left Hand Side ( Sitting On Bike )
Remove ( See picture ) correct engine bolt.
Replace the provide Left Side ( Longer Aluminum Step ) and 120mm bolt.
Tighten the frame slider to the manufacturer’s recommended torque settings.

Right Hand Side ( Sitting On Bike )
Remove ( See picture ) correct engine bolt.
Replace the provide Right Side ( Shorter Aluminum Step ) and 120mm bolt.
Tighten the frame slider to the manufacturer’s recommended torque settings.

Thank-you for purchasing Motovation products.  Please ride safe and always wear protective clothing.

WARRANTY AND LIABILITY LIMITATIONS
Except as may be expressly set forth in the product invoice, MotovationUSA makes no representations or warranties as to any of the products distributed by us, expressed or implied, including without limitation any warranties of merchantability or fitness for a particular purpose. Motorcycles can be dangerous. MotovationUSA has no control over the usage of any part and expects their customers to exercise good judgment as to the proper selection, installation, use and maintenance of any part. MotovationUSA assumes no responsibility for damage or injury of any kind because of the misuse or improper application of any part in any way by any person. MotovationUSA shall not be liable for any indirect or consequential damages whatsoever. All matters shall be interpreted under Texas law. All merchandise distributed by MotovationUSA is guaranteed against defects in material and workmanship only. Final decision will be made in a just and prompt manner. Replacement will be limited to parts only and does not include labor claims of any type. If the manufacturer has a written warranty, it will be included with the item you purchased. The manufacturer shall be solely responsible for any damage to person or property arising from design and manufacture and testing of its products and we accept no liability for such damages. We shall not be liable for consequential damages.

© 2005 Motovation Accessories, LLC