Motovation Suzuki GSXR 600/750 Installation Guide

2004 Suzuki GSXR 600 / 750 Race Frame Sliders Install Instructions

Congratulations! You have just purchased the world’s finest frame sliders for the Suzuki GSXR. These sliders have been designed to offer unsurpassed protection to your Suzuki GSXR in the unfortunate event of a lowside or tip over. Motovation frame sliders are designed and manufactured by a company that only makes frame sliders. Each and every model is tested for drop and slide protection. They are tough but not brittle and can also absorb a huge impact. Sportsriders around the world who have tested various models of our products on the track have all given their thumbs up after experiencing first hand, the benefits of Motovation Frame Sliders.

Please read all instructions before beginning work! These frame sliders are designed to fit specific engine mounts of your motorcycle. This kit has separate left and right pieces (left and right while sitting on the bike). It is highly recommended that you refer to your service manual before performing this installation.

Included in this kit
Left side frame slider - longer aluminum insert
Right side frame sliders - shorter aluminum insert
Heat treated steel bolt - left side 90mm
Heat treated steel bolt - right side 100mm

Installation Tools Required:
- Torque Wrench
- 8mm Allen Key for torque wrench
- 6mm Allen Key for torque wrench

INSTRUCTIONS:

Suzuki GSXR frame sliders install

Instructions:
Left hand side (sitting on bike)
- Remove the correct engine mounting bolt ( see picture ).
- Screw in the Motovation Frame Sliders with the longer aluminum insert in position
and torque to 55Nm.
- DO NOT OVERTIGHTEN. Loctite is recommended.

Right hand side (sitting on bike)
- Loosen the pinch bolt with a 6mm allen key and then use a 10mm allen
key ( see picture ).
- Screw in the Motovation Frame Sliders with the shorter aluminum insert in position
and torque to 55Nm, and pinch bolt to 23Nm.
- DO NOT OVERTIGHTEN. Loctite is recommended.

Thank-you for purchasing Motovation products. Please ride safe and always wear protective clothing.

WARRANTY AND LIABILITY LIMITATIONS
Except as may be expressly set forth in the product invoice, MotovationUSA makes no representations or warranties as to any of the products distributed by us, expressed or implied, including without limitation any warranties of merchantability or fitness for a particular purpose. Motorcycles can be dangerous. MotovationUSA has no control over the usage of any part and expects their customers to exercise good judgment as to the proper selection, installation, use and maintenance of any part. MotovationUSA assumes no responsibility for damage or injury of any kind because of the misuse or improper application of any part in any way by any person. MotovationUSA shall not be liable for any indirect or consequential damages whatsoever. All matters shall be interpreted under Texas law. All merchandise distributed by MotovationUSA is guaranteed against defects in material and workmanship only. Final decision will be made in a just and prompt manner. Replacement will be limited to parts only and does not include labor claims of any type. If the manufacturer has a written warranty, it will be included with the item you purchased. The manufacturer shall be solely responsible for any damage to person or property arising from design and manufacture and testing of its products and we accept no liability for such damages. We shall not be liable for consequential damages.