Motovation 2004-5 Yamaha FZ1 Installation Guide - Frame Sliders and Accessories

2004-05 Yamaha FZ1 Frame Sliders Install Instructions

Congratulations! You have just purchased the world’s finest frame sliders for the 2004-5 Yamaha FZ1. These sliders have been designed to offer unsurpassed protection to your 2004-5 Yamaha FZ1000 in the unfortunate event of a lowside or tip over. Motovation frame sliders are designed and manufactured by a company that only makes frame sliders. Each and every model is tested for drop and slide protection. They are tough but not brittle and can also absorb a huge impact. Sportsriders around the world who have tested various models of our products on the track have all given their thumbs up after experiencing first hand, the benefits of Motovation Frame Sliders.

Please read all instructions before beginning work! These frame sliders are designed to fit specific engine mounts of your 2004-5 Yamaha FZ1. It is highly recommended that you refer to your service manual before performing this installation.

Yamaha FZ600

Instructions:

1. Remove the left-side engine mount bolt as seen in the left picture.
2. Install the longer slider using the new bolt and washer with one washer under
the bolt head.
3. Tighten the engine mount bolt to the supplied locknut - DO NOT OVERTIGHTEN
4. Remove the right side engine mount bolt. (same place as the other side).
5. Install the other slider using the new bolt, nut and washers (supplied in this kit) with one
washer under the bolt head.
6. Tighten the engine mount bolt to the factory specifications - DO NOT OVERTIGHTEN.

Included in this kit:
(2) 10 x 140mm 1.5 bolts
(2) Stainless steel lock nuts
(2) Aluminum bushings (pressed into plastic)
(2) Plastic Frame Sliders (left-longer)
(4) Flat Washers

WARRANTY AND LIABILITY LIMITATIONS
Except as may be expressly set forth in the product invoice, MotovationUSA makes no representations or warranties as to any of the products distributed by us, expressed or implied, including without limitation any warranties of merchantability or fitness for a particular purpose. Motorcycles can be dangerous. MotovationUSA has no control over the usage of any part and expects their customers to exercise good judgment as to the proper selection, installation, use and maintenance of any part. MotovationUSA assumes no responsibility for damage or injury of any kind because of the misuse or improper application of any part in any way by any person. MotovationUSA shall not be liable for any indirect or consequential damages whatsoever. All matters shall be interpreted under Texas law. All merchandise distributed by MotovationUSA is guaranteed against defects in material and workmanship only. Final decision will be made in a just and prompt manner. Replacement will be limited to parts only and does not include labor claims of any type. If the manufacturer has a written warranty, it will be included with the item you purchased. The manufacturer shall be solely responsible for any damage to person or property arising from design and manufacture and testing of its products and we accept no liability for such damages. We shall not be liable for consequential damages.