Installation Instructions for Yamaha Clutch Slider Kit

Congratulations! You have just purchased the world’s finest clutch protection slider kit for for the Yamaha R1 and R6. These sliders have been designed to offer unsurpassed protection for your Yamaha R1 and R6 in the unfortunate event of a lowside or tip over. Motovation clutch protection slider kits are designed and manufactured by a company that only makes frame sliders. Each and every model is tested for drop and slide protection. They are tough but not brittle and can also absorb a huge impact. Sportsriders around the world who have tested various models of our products on the track have all given their thumbs up after experiencing first hand, the benefits of Motovation Sliders.

Please read all instructions before beginning work! These frame sliders are designed to fit specific engine mounts of your clutch protection slider kit. It is highly recommended that you refer to your service manual before performing this installation. If you are unsure about the tightening torque, check your motorcycle's manual or www.motovationusa.com/torque.html for a quick reference guide

INSTRUCTIONS:
Remove the stock factory nut from the wingarm pivot shaft. and replace with the supplied machined adapter nut. It is recommended that you use some non-permanent thread lock compound when doing this.  Torque the adapter onto the shaft to factory specs.

Install the supplied slider over the adapter and secure with the supplied 10mm socket head cap screw and washer. Use permanent thread lock compound during this step.

Do Not Over Tighten!

Thank-you for purchasing Motovation products.  Please ride safe and always wear protective clothing.

WARRANTY AND LIABILITY LIMITATIONS
Except as may be expressly set forth in the product invoice, MotovationUSA makes no representations or warranties as to any of the products distributed by us, expressed or implied, including without limitation any warranties of merchantability or fitness for a particular purpose. Motorcycles can be dangerous. MotovationUSA has no control over the usage of any part and expects their customers to exercise good judgment as to the proper selection, installation, use and maintenance of any part. MotovationUSA assumes no responsibility for damage or injury of any kind because of the misuse or improper application of any part in any way by any person. MotovationUSA shall not be liable for any indirect or consequential damages whatsoever. All matters shall be interpreted under Texas law. All merchandise distributed by MotovationUSA is guaranteed against defects in material and workmanship only. Final decision will be made in a just and prompt manner. Replacement will be limited to parts only and does not include labor claims of any type. If the manufacturer has a written warranty, it will be included with the item you purchased. The manufacturer shall be solely responsible for any damage to person or property arising from design and manufacture and testing of its products and we accept no liability for such damages. We shall not be liable for consequential damages.

© 2005 Motovation Accessories, LLC