All
Years Aprilia Falco Frame Sliders Install Instructions
Congratulations! You have just purchased the world’s
finest frame sliders for the Aprilia Falco. These sliders have
been designed to offer unsurpassed protection to Aprilia Falco
motorcycle in the unfortunate event of a lowside or tip over.
Motovation frame sliders are designed and manufactured by a company
that only makes frame sliders. Each and every model is tested
for drop and slide protection. They are tough but not brittle
and can also absorb a huge impact. Sportsriders around the world
who have tested various models of our products on the track have
all given their thumbs up after experiencing first hand, the
benefits of Motovation Frame Sliders.
Please
read all instructions before beginning work! These frame
sliders are designed to fit specific engine mounts of your
Aprilia Falco. This kit has separate left and right pieces
(left and right while sitting on the bike). It is highly
recommended that you refer to your service manual before
performing this installation. If you are unsure about the
tightening torque, here are some standard
torque settings to serve as a guide.
Included
in this kit:
(2) Heat treated socket head bolts M10 x 150mm x 1.5 pitch
(2) Stainless steel bushings (pressed into plastic)
(2) Plastic Frame Sliders
• Left
(shorter piece)
• Right (longer piece)
Instructions:
- Remove the right-side engine mount bolt (located behind the fairing – halfway
down the frame rail). You will need a wrench to hold the nut in place. This
nut will be reused so do not discard it.
- Install the longer slider using the new 10 x 150mm bolt and the original
nut.
- Tighten the engine mount bolt to the factory specifications - DO NOT OVERTIGHTEN.
- Remove the left-side
engine mount bolt. (same location as right side).
- Install the shorter piece of plastic(the one with the smaller diameter spud)
using the remaining supplied in this kit.
- Tighten the engine
mount bolt to the factory specifications - DO NOT OVERTIGHTEN.
Thank-you
for purchasing Motovation products. Please ride safe
and always wear protective clothing.
Log
In 
