Congratulations!
You have just purchased the world’s finest frame sliders
for the 2003 Aprilia RSV/Tuono. These sliders have been designed
to offer unsurpassed protection to your 2003 Aprilia RSV/Tuono
in the unfortunate event of a lowside or tip over. Motovation
frame sliders are designed and manufactured by a company that
only makes frame sliders. Each and every model is tested for
drop and slide protection. They are tough but not brittle and
can also absorb a huge impact. Sportsriders around the world
who have tested various models of our products on the track have
all given their thumbs up after experiencing first hand, the
benefits of Motovation Frame Sliders.
Please
read all instructions before beginning work! These frame
sliders are designed to fit specific engine mounts of your
2003 Aprilia RSV/Tuono. This kit has separate left and right
pieces (left and right while sitting on the bike). It is
highly recommended that you refer to your service manual
before performing this installation. If you are unsure about
the tightening torque, here are some standard
torque settings to
serve as a guide.
Included
in this kit:
(1) Left side Frame slider- smaller diameter insert
(1) Right side Frame slider- larger diameter insert
(2) Heat treated steel bolts -160mm
Tools
Required:
Torque Wrench
10 mm Allen key for torque wrench
10 mm Allen key
INSTRUCTIONS:
Before
beginning work, make sure that engine is cold due to
the proximity of the exhaust headers to the nuts at
the back of the bolts.
Right
Hand Side ( Sitting On Bike )
1) Remove ( See picture ) correct bolt -try not drop the nut and washer.
2) Install the provided Right Slider (larger diameter slider insert)
and 160mm bolt and re-use the factory supplied nut. Align
the slider by rotating it so that the slider cutouts clear the fairing
( RSV/R Mille Only).
3) Tighten the frame slider to the manufacturer’s recommended torque
settings.
DO
NOT OVERTIGHTEN.
Left
Hand Side ( Sitting On Bike )
Repeat the process with the left side slider that has the smaller diameter
slider insert.
Log
In 
